PUIG 21345N Hebel 3.0. passend fuer TRIUMPH TIGER SPORT 660 Schwarz
SKU: 80530174503

PUIG 21345N Hebel 3.0. passend fuer TRIUMPH TIGER SPORT 660 Schwarz

$33.29 $36.99
Save 10%
No.2 Bestseller on best-medical-schools.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

PUIG 21345N Hebel 3.0. passend fuer TRIUMPH TIGER SPORT 660 SchwarzPUIG 21345N Hebel 3. 0. passend fuer TRIUMPH TIGER SPORT 660 2022 Erneuern Sie die Hebel Ihres Motorrads mit den neuen PUIG 3. 0 Hebeln. Es ist die Weiterentwicklung der Version 2. 0. PUIG hat beim entwicklen des Aussehens Wert auf die ergonomische Verbesserung des Modells gelegt um die Hebel diesbezglich zu verbessern. Nun verleihen die Hebel dem Motorrad einen moderneren und aggressiveren Touch. Die neue Form der Hebel ermglicht einen perfekten

PUIG 21345N Hebel 3.0. passend fuer TRIUMPH TIGER SPORT 660 2022

Erneuern Sie die Hebel Ihres Motorrads mit den neuen PUIG 3.0 Hebeln. Es ist die Weiterentwicklung der Version 2.0. PUIG hat beim entwicklen des Aussehens Wert auf die ergonomische Verbesserung des Modells gelegt um die Hebel diesbezüglich zu verbessern. Nun verleihen die Hebel dem Motorrad einen moderneren und aggressiveren Touch. Die neue Form der Hebel ermöglicht einen perfekten Griff, der mehr Grip und Zugänglichkeit garantiert und das Fahrerlebnis einzigartig macht. Was die neuen Looks betrifft, so hat PUIG alle Grafiken, die im Stück enthalten sind, erneuert und sie an die neuesten Zeiten angepasst. Außerdem können Sie das Produkt in 7 verschiedenen Farben bekommen. Die 3.0 PUIG-Griffe sind in 4 verschiedenen Modellen erhältlich: Klappbar, Fest, sehr Kurz und Ausziehbar und Klappbar in einem. PUIG hat seine Bemühungen darin gelegt dieses neue Modell zu verbessern. Und es ist gelungen. Die Ergonomie zu verbessern, sodass die Hände und Finger es bequem haben und gleichzeitig perfekter Halt garantiert ist. Was die Montage betrifft, so werden die Hebel mit detaillierten Anweisungen geliefert und erfordern keine Modifikationen am Motorrad. Falls es das erste Mal ist, dass ein Griffsatz gekauft wird, müssen Sie auch den Satz spezifischer Befestigungen für Ihr Motorrad kaufen, da die Puig-Griffe nicht mit den Originalbeschlägen montiert werden.  Die Montage der Beschläge muss von einem Fachmechaniker durchgeführt werden. Da bei der Umrüstung aufgrund vom verändern der Position der Bremspumpe das Rad mit einem Gestell angehoben werden muss. Um sicherzustellen, dass das Rad nicht gebremst ist. Wenn es abgebremst ist, kann es dazu führen, dass die Bremsen blockieren. Puig 3.0 Griffe haben das TÜV Zertifikat und die deutsche Zulassung ABE 91294. Für die Montage / ein vollständiges Set ist es nötig folgende Artikel zu bestellen: Bremshebel und Bremshebeladapter sowie Kupplungshebel und Kupplungshebeladapter. Bitte prüfen Sie die ABE sorgfältig, um sicherzustellen, dass dieses Teil für Ihr Motorrad geeignet ist.

Bremshebeladapter

passend für:

TRIUMPH TIGER SPORT 660 2022
TRIUMPH TIGER SPORT 660 2023
TRIUMPH TIGER SPORT 660 2024
TRIUMPH TIGER SPORT 660 2025
TRIUMPH TIGER SPORT 800 2025

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 80530174503

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 205 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
P. Schmidt
Los Angeles, US
★★★★★ 4
Good quality, bright, good light projection pattern, good choice for snowblowers
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
This review is ONLY for the Nilight model 1260LM (the package of TWO of them). This product has a flexible design, allowing it to be used in a variety of ways when you want to add illumination to a vehicle of some kind. It can be used as add-on fog lamps for trucks and off-road vehicle, it can be used as headlights for golf carts and such, and it is a good choice for adding headlights to snowblowers. The two mounting brackets allow swiveling and angling up and down for best aim and illumination pattern. Each 'lamp' assembly is mostly made of black anodized or black powder-coated aluminum, with a water-resistant design. The front 'lens' is Lexan or some other suitable clear plastic material with good, durable properties. The manufacturer claims that the included mounting hardware (bolts, nuts, washers) are stainless steel, but they seem to weigh too little to be SOLID stainless. Whatever they are made from, they do not attract strong (neodymium) magnets. Because I bought the lamps to use on my snowblower, I decided to replace the included hardware with solid stainless hardware. The large bolts for mounting the brackets are M8 x 1.25 and the smaller bolts for attaching the lamps to the brackets are M6 x 1.0. I also chose to purchase the smaller bolts with 'cap head' bolts, because it make lamp angle adjustment much quicker and easier. Each included bolt comes with a flat washer and a split-ring lockwasher, and the large bolts also come with nuts (the smaller bolts thread directly into pre-tapped holes in the lamp bodies). The included lockwashers make sense for the main mounting bracket bolts, but there is no reasonable place to use the lockwashers of the smaller bolts. I inquired of Nilight tech support, and they clearly had never thought about WHERE those lockwashers should be used, and they concluded that they probably should NOT actually be used. Each lamp has a short (perhaps 6") 'pigtail' cable coming out of one rear edge, and these cables each have a pair of wires inside; a RED one for + and a BLACK one for - . The user can wire these up any way that is desired, but probably they will be wired in parallel in most situations. I wish that the cables were longer; as it is, it is necessary to splice them to other cables in places that will not be hidden from view and/or otherwise protected from the elements. These lamps are designed to operate on 12VDC power, although the exact voltage is not critical. There is no need to use a special LED power supply, since the lamps include their own internal power conditioning circuitry. Powering these from 12VDC, EACH lamp will required 1A of current, to 2A total when wired in parallel. This comes to 12V x 2A = 24 Watts. In my case, I needed to power the lamps from a cordless power tool battery which produces a nominal 20VDC, which can drop as low as about 16V. Accordingly, I used one of the ubiquitous and inexpensive "DC Converters" (aka "DC-DC Converter") with an input having a voltage range that includes the expected 16~20V of the battery, and has a regulated 12V output, and has a Power (Watts) rating of at least twice the expected load, in this case a 60W one from Amazon. Since these converters have nearly a 100% efficiency, the input and output power (Watts) will be the same value, 24W. Doing the math in my case, an assuming an average battery voltage of 18V, the math is 24W / 18V = 1.3A. My battery has an Amp-Hour (Ah) of 4, so 4 / 1.3 = about 3 hours of operating time for the two lamps from a fully charged battery. My only gripes with the product have already been mentioned: - overly short power cords - poorly conceived hardware 'package'; the smaller lockwasher are useless, and the associated bolts should have had cap heads instead of hex heads (I won't complain about the lack of sold stainless steel hardware, since that would have driven the selling price WAY up)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
M
Verified Purchase
michael jones
Louisville, US
★★★★★ 5
LOVE these LIGHTS !!!
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
i put 2 on the front of my 24" ariens snowthrower and it actually was to much !!! using one now and PLENTY of light !!! i have lots of dewalt batteries and i bought a adapter that allows me to put a battery in and has switch and fuse , wired to light and used one of my old 2AH batteries and it lasted 2.5 hours no problem , non stop . my newer batteries are 6 and 8 AH and last up to 8 hours before recharge . LOVE these LIGHTS !!! installing one on ladder rack on rear of truck . you know how many times that will be used on a late evening or early start so i can see to load or unload .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026
I
Verified Purchase
ITO
Chelsea, US
★★★★★ 5
Good bang for the buck.
Color: 2Pcs 18W LED Flood Light
I have bought 10 of these now. I put them on my work trailer and use them for reverse lights. They are cheap, easy to install, and they work very well. Now and then, I break one; they are exposed on my trailer and stuff happens, and these are so cheap it's not a big deal to replace them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026
J
Verified Purchase
Jason Ross
Omaha, US
★★★★★ 5
used for a snowblower light upgrade
Color: 2Pcs 18W LED Flood Light
I replaced the halogen bulb that came with my snowblower with these bad boys. Talk about a night and day difference! I was able to use two existing holes on the top of the blower and the included brackets to mount them. I also had to get a rectifier that converted the AC 24V to the 12V DC these expect. Used some scrap conduit, wire loom, and some project boxes to bring the whole thing together. Now the light is a lot brighter, and it's not half-blocked by the chute. Big improvement! You can find plenty of howtos and parts lists on youtube to do the same.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
D
Verified Purchase
Dan W
Massapequa, US
★★★★★ 3
use care when starting the bolts.
Color: 2Pcs 18W LED Flood Light
Had these for awhile before I got around to installing them or should say attempted to install these. Mounting the bracket was challenging with supplied bolts. The predrilled holes in the mounting block were very poorly threaded. It was almost impossible to get the bolts started without cross threading. The finished product was acceptable. I have other Nilight products and never experienced a single issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026

recommand products

pupazzo babbo natale in tessuto con regali rosso cm 40x23 5xh80 232503
174.90
tenda rosa decoro cuori cm 154x 260 232379
54.90
Der L-BOXX Hoodie in Grau-Weiß (Herren / Größe XXL) - Sportlich und Bequem
50.28
pupazzo babbo natale a forma di albero con luci cm o9 5xh29 232484
30.90
targhetta birreria no smoking cm 54x32 da appendere 232370
58.90