Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Edelbrock 2703 Performer Eps Intake Manifold With Oil Fill Tube And BreatherDesigned For 1986 And Earlier 262 400 Cubic Inch Chevys, The Performer Eps Dual Plane Intake Manifold Is Optimized To Deliver Superior Performance With Edelbrock Square Bore Performer Series Or Thunder Series Avs Carburetors. This Small Block Chevy Manifold Has A Runner Design That'S ''Tuned'' For Peak Torque At 3500 Rpm On A 350 Inch Engine And It'S Ideal For Power From Off Idle To 5500 Rpm. Dyno Tests Showed Gains Of 5 Hp And 9 Ft Lbs. Of Torque
Designed For 1986 And Earlier 262-400 Cubic-Inch Chevys, The Performer Eps Dual-Plane Intake Manifold Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series Avs Carburetors. This Small-Block Chevy Manifold Has A Runner Design That'S ''Tuned'' For Peak Torque At 3500 Rpm On A 350-Inch Engine And It'S Ideal For Power From Off-Idle To 5500 Rpm. Dyno Tests Showed Gains Of 5 Hp And 9 Ft-Lbs. Of Torque Over The Edelbrock Performer Manifold #2101 On A 350 Chevy. From 3000 To 4500 Rpm, The Increases Averaged 5+ Ft-Lbs. Of Torque For More Performance Where You Need It Most. Performer Eps Manifold #2703 Combines A Modern Runner Design With A Front Mounted Oil Fill Tube For Those Who Want The Vintage Look Of Our Classic Valve Covers With No Breathers. #2703 Has The Same Performance Features As The Performer Eps #2701. Includes Oil Fill Tube (Not Installed) And Matching Push-In Breather Cap. The Oil Fill Tube And Breather Are Also Available Separately As #4803. Match With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains. Also Available With Choice Of Four Finishes. Will Not Fit Under Stock Corvette Hood. ** Carburetor Recommendations: Edelbrock Thunder Series Avs Or Performer Series Carb, 500-650 Cfm. Installation Notes: Recommended Intake Gasket: Edelbrock #7201. Manifold Ht: A-3. 74'', B-4. 80''; Carb Pad Height: 4. 27''. Port Exit Dimensions: 1. 15'' X 1. 87''. Camshaft Recommendations: #2102, #2103, #2208, #2209
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 91 reviews
Sort
Product Reviews
★★★★★ 5
Perfect for protein shakes and coffee - one warning about getting it wet
Color: Black, Size: normal
Bought this to replace a similar handheld whisk I had been using for protein shakes and stirring extras into my morning coffee. At this price point I was not expecting much, and it has done exactly what I need - with one warning I will get to.
I use this almost every morning. Two jobs: mixing a scoop of whey protein into water or milk so it actually dissolves (no clumps stuck to the side of the shaker), and stirring pre-workout powder or a flavor additive into my coffee. This is not a blender and I do not treat it like one. For small-volume mixing of powders into liquid, it is the right tool.
WHAT WORKS
- It does not over-froth or whip air into the drink. Some handheld whisks turn a protein shake into a foam mess. This one keeps the liquid liquid - it just dissolves the powder. That is the main reason I came back to this category.
- No splashing, even with the cup near the brim. I can stir a nearly-full coffee mug without flicking liquid onto the counter. The previous one I owned could not do this.
- One button. Runs as long as I hold it. A typical protein shake or coffee mix takes under ten seconds.
- Easy to hand-wash. Rinse the whisk end, wipe the handle, back in the drawer.
WHAT DOES NOT (the warning)
- You cannot throw the whole thing in the sink with the rest of the dishes. The handle is not waterproof. We made this mistake exactly once - it got soaked, never worked again. At this price the loss was not a big deal, but it is the one thing I wish the listing made more obvious. Hand-clean the whisk end only, keep the handle dry.
- Battery-powered. Replace the batteries when it starts feeling slow rather than waiting for it to fully die mid-shake.
WHO IT IS FOR
If you need a small-volume mixer for protein powder, coffee, hot chocolate, pre-workout, or anything where you are dissolving a powder into a single cup or shaker, this is the tool. If you want to blend smoothies or actually break down ingredients, buy a real immersion blender instead.
Five stars. The wet-handle failure was my mistake, not the product's. Doing its job every morning - would buy again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 4
$7 value
Color: Black, Size: normal
Works wonderfully if the liquid you’re blending has no viscosity, but it slows down brutally if given any kind of resistance.
It’s small and lightweight and very easy to use.
Works for my bloom, but it does not work very well for my protein shakes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
★★★★★ 5
My Matcha Frother
Color: Silver, Color: Silver
I recently started making matcha tea at home and opted for a milk frother instead of the bamboo hand whisk that is traditionally used for matcha, due to health issues. I have a connective tissue disorder and early osteoarthritis and need to protect my wrists, so the hand whisk would be risky for my daily matcha habit. The Vomelon frother is perfect for mixing up my matcha tea powder into my water or almond milk while saving my joints from further damage.
I liked the included cover for this model, and the large on/off button on the top of the device. Other models have their switches and buttons placed in odd places that could be awkward for me. I have trouble pushing this device's button with my thumb, even though it seems designed to be done this way, so I typically use my index finger to switch it on and off. This works well for me. You don't have to hold the button while it's on - it stays on until you turn it off - so that helps.
The two coil attachments are nice, too. The single coil one does a decent job, but the triple coil really blends up well, and froths up my almond milk into a airy, frothy cup rather quickly, if that's what I'm going for.
It uses 3 AAA batteries, and I worried they would get used up with daily use, but I have been using mine daily for about a minute or so each day (I blend my matcha, then rinse off by blending clean water and then spin dry before I store it) every day for about a month now and it's still going strong on the original batteries. I am ready with spares for whenever they peter out, though. I checked the battery chamber to make sure I knew how to switch them out, and it's very easy. They are stacked in the end of the device, so you just twist off the end and slide out. There is a holder for the 3 batteries, so you pop them out/in and just slide it back into the main housing and twist it back on. The +/-indicators show which way to place them. I believe it's 2 one way and one the opposite way.
The attachments simply hold onto the spinning bit with tiny grooves in the spinner that fit snugly. They don't click into place or anything, but I have had no trouble with them feeling loose or anything while in use, as long as they are fully in place. Just slide them all the way in and you'll be fine.
Overall, this works well for my matcha tea and milk frothing needs. I tried it once with an egg to see how well it scrambled, but I used the single coil attachment and it seemed to slow down a lot in the gooey egg viscosity, so I can't say I would recommend it for scrambling eggs, especially if you are doing more than one at a time. However, I only tried once and only with the smaller, single coil attachment. You may have better luck with it if that's what you're looking to use it for.
Overall, I'm happy with my purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2019
★★★★★ 5
Great whisk, but stop changing the whisk design or sell extras
Color: Silver
Overall, I really like this frother. It’s my third one from the same brand. (They last about a year but kind of expected for $15.) I like that it comes with multiple whisks, that it can travel, and that the whisks are removable and can be thrown in the dishwasher. As others have pointed out, the batteries it comes with are pretty useless. I didn’t get even one proper whisk out of them. I also wish they wouldn’t change the whisk design every time I purchase. I like having extra whisks and just have to throw the old ones out. I wish these companies would sell extra whisks.
Update: after using this for a couple weeks, I really don’t like the design of he new whisk attachments. They’re hard to pull off without sending the tip flying.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 23, 2026
★★★★★ 5
Delightful little device now that I've had a practice run with it
Color: Silver
I just picked this up to make my own cappuccino and breve and I must say that I've fallen in love with the thing. My first use was a bit of a misfire owing to my inexperience with it, but the second time worked like a champ. The trick is to ensure that you have plenty of empty head space in the container to develop a good vortex and foam volume while still having a tall enough fluid column to keep the mixing head mostly submerged while generating the vortex.
My first attempt involved using about half a cup of half and half in a small saucepan. I had more than enough head space, but I was only barely able to keep the mixing head (it comes with two: a single turn coil and a 3-turn coil of coil) submerged and that went poorly, leaving me with a bit of a mess to clean up on my rangetop as the lack of fluid column ended up slinging the fluid around and out of the saucepan.
The second attempt went far better, as I transferred the barely-simmered half and half back into the Pyrex two-cup mixing cup in which i initially measured the 4 fl. oz. This time it worked beautifully. There was just enough unfoamed column height to keep the mixing head well covered prior to powering up and it just barely kept me sufficiently covered while powered up to maintain a very vigorous yet controlled vortex. This method also had the advantage of telling me exactly how much total foamed volume I had generated. The resulting breve had a wonderfully thick and frothy head in my mug and resulted in a delightfully topped beverage which, if anything, had a bit too much foam and a bit too little liquid. That's on me, however, since I wanted to get a feel for the device under better conditions to build my own experience; I'll just run the frother for less time next time.
Cleanup of the device itself is quite easy: simply detach the mixing head and shaft from the motor base and rinse. I always hand-wash my dishes, so I'm not in a good position to speak to its machine wash compatibility, but I suspect that it would come out just fine, provided that care is taken not to bend the shaft or coil head out of shape.
The device itself is small enough to fit in a purse and should travel quite nicely, though you'll need to commit to a single mixing head, which will almost certainly turn out to be the smaller one.
It's really nice to be able to make cappuccino/breve at home any time I see fit now. It's going to make a well-loved addition to my kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2018