TREMprime Multi-Surface Urethane Primer

TREMprime Multi-Surface Urethane PrimerTremco TREMprime Multi Surface Urethane Primer 3 Gal Kit Two Component, Low VOC Epoxy Based Primer for Urethane Deck Coatings & Waterproofing Systems Brand: Tremco Tremco TREMprime Multi Surface Urethane Primer is a two component, quick drying, epoxy based, VOC compliant primer for use with Vulkem and Tremco urethane deck coatings and sealants. Confirm suitability, coverage, cure time, and system compatibility against the current Tremco TDS, SDS, and

Tremco TREMprime Multi-Surface Urethane Primer | 3 Gal Kit

Two-Component, Low-VOC Epoxy-Based Primer for Urethane Deck Coatings & Waterproofing Systems | Brand: Tremco

Tremco TREMprime Multi-Surface Urethane Primer is a two-component, quick-drying, epoxy-based, VOC-compliant primer for use with Vulkem® and Tremco urethane deck coatings and sealants. Confirm suitability, coverage, cure time, and system compatibility against the current Tremco TDS, SDS, and project specification before use.

Key Characteristics

• Two-component, epoxy-based — requires accurate mixing; confirm pot life and application requirements against the current TDS before use.
• Low VOC (<60 g/L) — confirm VOC content and ventilation requirements against the SDS.
• Visual cure indicator — milky-white to clear colour change indicates cure; confirm cure requirements against the current TDS before applying subsequent coats.
• Multi-surface — designed for use on porous surfaces and existing coatings; confirm substrate preparation requirements against the current TDS before use.
• System compatible — designed for use with Vulkem® and Tremco urethane deck coatings and sealants; confirm system compatibility against the current Tremco TDS before ordering.

Typical Applications

• Primer for Vulkem urethane traffic deck systems
• Primer for Tremco waterproofing and sealant systems
• Priming porous concrete and existing coatings prior to urethane deck coating application

Limitations

• Must be used as part of an approved Tremco system — confirm system specification before use.
• Confirm substrate preparation requirements against the current TDS before use.
• Pot life and cure times are temperature-dependent — confirm against the current TDS.
• Do not apply the subsequent coat before the primer has cured to the state specified in the TDS.

Canopus Supply Inc. — Authorized Tremco Distributor, Metro Vancouver & BC

Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.