Transition Networks C2110-1040 Fast Ethernet Media Converter
SKU: 14503579519

Transition Networks C2110-1040 Fast Ethernet Media Converter

Sale price$94.12 Regular price$104.58
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Transition Networks C2110-1040 Fast Ethernet Media ConverterTransition Networks C2110 1040 Fast Ethernet Media Converter Fiber Integration in 10 100 Copper Environments: The Transition Networks C2110 1040 Fast Ethernet Media Converter is engineered to bridge 100Base TX copper networks with 100Base FX fiber links. This compact device makes it simple to extend your existing copper infrastructure into fiber distributed segments without a full switch upgrade, delivering greater distance, improved reliability, and

Transition Networks C2110-1040 Fast Ethernet Media Converter

Fiber Integration in 10/100 Copper Environments: The Transition Networks C2110-1040 Fast Ethernet Media Converter is engineered to bridge 100Base-TX copper networks with 100Base-FX fiber links. This compact device makes it simple to extend your existing copper infrastructure into fiber-distributed segments without a full switch upgrade, delivering greater distance, improved reliability, and enhanced network segmentation. Designed for edge deployments, campuses, data centers, and remote sites, the C2110-1040 helps you preserve current cabling while unlocking the performance and resilience benefits of fiber. With its straightforward plug-and-play approach, clear LED indicators, and rugged construction, this media converter provides a dependable pathway to scale your network as needs evolve.

  • Bridge copper to fiber with ease: The C2110-1040 converts 100Base-TX signals from an Ethernet device (switch, router, or NIC) onto a 100Base-FX fiber link. This enables you to place devices farther apart, extend a campus network footprint, or segregate traffic without replacing your existing copper switches. By leveraging fiber for long distances and copper for the local access, you gain a flexible, cost-effective expansion strategy that minimizes downtime and preserves your current investment in copper-based infrastructure.
  • Two transceivers for flexible deployment: Built to accommodate dual-path connectivity, this unit supports two transceiver interfaces—one copper, one fiber—so you can adapt to changing layouts as your network grows. The two-transceiver design supports straightforward cross-connection between copper and fiber segments, making it easy to re-route connections, upgrade paths, or reconfigure a wiring closet without swapping equipment. It’s a smart choice for mixed environments where high availability and scalable reach matter most.
  • Plug-and-play with auto-negotiation: The C2110-1040 is designed for fast, hassle-free installation. It automatically negotiates link speed and duplex settings with connected devices, delivering a transparent bridge that preserves MAC addresses and VLANs as traffic crosses from copper to fiber. This means no complex IP configuration or management overhead is required, allowing IT teams to deploy fiber links quickly and with minimal disruption to ongoing operations.
  • Visible diagnostics and robust design: Front-panel LEDs provide immediate feedback on power status, copper link, fiber link, and data activity, empowering technicians to diagnose issues at a glance. The converter’s compact form factor fits neatly on a desk, in a rack, or in a small equipment cabinet, while its solid construction supports reliable operation in busy environments. Whether you’re building fault-tolerant networks or simply extending reach, the C2110-1040 delivers dependable performance with minimal maintenance.
  • Cost-efficient fiber adoption and network resilience: As networks evolve, fiber offers higher immunity to EMI, greater bandwidth potential, and longer reach compared with copper. The Transition Networks C2110-1040 provides a cost-efficient path to fiber adoption by enabling a phased migration—you can upgrade specific links to fiber while leaving the rest of your copper network intact. This approach supports smarter traffic distribution, improved performance for remote sites, and a clearer upgrade roadmap for campuses, data centers, and industrial environments where fiber connectivity is advantageous.

Technical Details of Transition Networks C2110-1040 Fast Ethernet Media Converter

  • Interfaces: 100Base-TX copper Ethernet port (RJ-45) and 100Base-FX fiber port
  • Transceivers: 2 transceivers per unit (supporting copper-to-fiber bridging for 100Base-TX and 100Base-FX)
  • Standards supported: IEEE 802.3u 100Base-TX/100Base-FX compatibility for standard Ethernet operation
  • Environment: Compact, durable enclosure suitable for desktop or rack-mount installations in office, data center, or network edge environments
  • Diagnostics: Front-panel LEDs for power, copper link, fiber link, and activity to streamline troubleshooting
  • Power: External DC input power supply (voltage and current per model variant; refer to product documentation for exact specs)

How to install Transition Networks C2110-1040 Fast Ethernet Media Converter

  • Plan the path: Identify the devices to connect on both sides—your copper-based Ethernet device (switch, router, or NIC) and the fiber segment you intend to link. Confirm that the fiber path is clear, with minimal bending and appropriate connector types for 100Base-FX.
  • Connect copper side: Use a standard Ethernet cable to link the 100Base-TX RJ-45 port on the converter to the chosen copper device. Ensure the device on the copper side is configured correctly for 100 Mbps operation if auto-negotiation is not active.
  • Connect fiber side: Attach the fiber optic cable to the 100Base-FX port using the appropriate connector. Route the fiber so it is not stressed and avoid sharp bends to maintain signal integrity. If necessary, verify polarity and alignment according to the fiber type in use.
  • Power up and verify: Connect the power supply to a suitable outlet and power the unit. Watch for the power LED to illuminate, then verify copper and fiber link LEDs. If either link does not illuminate, recheck connections and cable quality, then cycle power if needed.
  • Test and validate: From devices on each side, perform basic connectivity tests such as pings or file transfers to confirm end-to-end functionality. Monitor LED activity during data bursts to confirm that traffic is traversing the converter as expected, and document any anomalies for troubleshooting.

Frequently asked questions

  • What is the Transition Networks C2110-1040 Fast Ethernet Media Converter? It is a plug-and-play device that bridges 100Base-TX copper Ethernet with 100Base-FX fiber, enabling seamless fiber integration into existing copper networks while preserving network architecture and MAC-level transparency.
  • What ports are included on the converter? The unit provides one 100Base-TX copper RJ-45 port and one 100Base-FX fiber port, enabling straightforward copper-to-fiber bridging.
  • What deployment scenarios are ideal for this converter? It’s well-suited for extending Ethernet to remote buildings, connecting fiber-ready devices in campus or data-center edge environments, or upgrading specific links to fiber without a full switch replacement.
  • Does the device require IP configuration? No, the media converter operates at the data link layer and does not require IP configuration for basic operation; it is designed to transparently bridge traffic between copper and fiber.
  • Where can I find detailed specifications and warranty information? Consult the official product documentation or the vendor’s specifications page for model-specific details and warranty terms.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 14503579519

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 661 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
W
Verified Purchase
waragon
Massapequa, US
★★★★★ 4
If they squeaked, they would be the perfect ball!
Size: 2-pack, Style: Duo
I bought our 15 month old Coton several Chuck-It toys on an Amazon deal. He is incredibly playful, mischievous, and ball/toy obsessed, especially for anything that makes noise. He can also be very destructive so I love how durable most of their products are - they’re among our longest lasting toys and worth every penny. We have yet to take them to the dog park, but they’re a perfect size for sharing in plat time. And they are keeping him busy at home - that’s a good thing. The scent is subtle but strong enough for him I guess because he loves gnawing on them. If they had squeakers, they would be absolutely perfect. Hopefully Chuck-It will see an opportunity for that down the road!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
R
Verified Purchase
Reepeat
Omaha, US
★★★★★ 5
Most durable fetch balls I know of.
Size: 2-pack, Style: Duo
These balls are the biggest balls of them all. Well, not the biggest, but the best. Every other ball she would chew up in short order and I'd be throwing her a floppy piece of rubber. She just wants to fetch, but if it's not bouncing, she can't catch it on the bounce. Got these balls in July and no damage to them. I just ordered another pair, but only because the other two somehow got stuck up in trees. We have some very old and very large oak trees so not so easy to retrieve. Hope they somehow drop someday. But in the meantime, Lassie will be happy with her new ones. Very highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 28, 2025
B
Verified Purchase
Blonde Aggie
Battle Creek, US
★★★★★ 5
Works great for scent work! Bounce is great for air retrieve!
Size: 2-pack, Style: Duo, Size: 2-pack, Style: Duo
My dog doesn’t know he loves them yet but I do! They are a little softer so when we do air retrieve, I don’t have to worry as much about his teeth! I’m hoping he will learn to find them by smell vs sight. We often play in the evenings and he tends to loose his ball. Love chuck it! Right now, we have about 10 chuck it balls! The tennis balls don’t work for air retrieve! Chuckit does!!! Love the thrower too! Saves my arm!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 6, 2025
N
Verified Purchase
None of your business
Lowell, US
★★★★★ 3
I guess the smell is offputting
Size: 2-pack, Style: Duo
My dog loves chocolate stuff. But for some reason, wasn’t a huge fan of these balls. She played with them a little bit, but they’re not her favorite.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
L
Verified Purchase
Loracpay
Waukegan, US
★★★★★ 5
Nice Ball!!
Size: 6 Inch, Color: Red, Size: 6 Inch, Color: Red
Brinkley my Golden doodle loves her ball. Carries it everywhere. Its holding up pretty well. And the tabs make it easy to play tugga war.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026

recommand products