BetaFPV ELRS Gemini Xross Receiver
SKU: 32893038676

BetaFPV ELRS Gemini Xross Receiver

Sale price$23.40 Regular price$26.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BetaFPV ELRS Gemini Xross ReceiverPowered by Semtechs LR1121 RF chips and Espressifs ESP32 C3, the SuperX pioneers BETAFPVs first Gemini Xrossband receiver mastering 900M (868 915MHz) and 2. 4G bands via LoRa and blistering 1000Hz FSK modes. Conquer race gates and long range horizons with unshakeable signal reliability, where lesser links fail. Choose the dual band mastery of SuperX Nano or the band switching agility of SuperX Mono for precision tuned performance in any flying

Powered by Semtech’s LR1121 RF chips and Espressif’s ESP32-C3, the SuperX pioneers BETAFPV’s first Gemini Xrossband receiver – mastering 900M (868/915MHz) and 2.4G bands via LoRa and blistering 1000Hz FSK modes. Conquer race gates and long-range horizons with unshakeable signal reliability, where lesser links fail. Choose the dual-band mastery of SuperX Nano or the band-switching agility of SuperX Mono for precision-tuned performance in any flying scenario.

Features

  • Semtech LR1121 RF chips + Espressif ESP32-C3
  • LoRa and blistering 1000Hz FSK modes
  • Supports 900M Gemini, 2.4G Gemini, 900M+2.4G GemX
  • SuperX Nano: Dual-band mastery for RF-challenged environments
  • SuperX Mono: Band-switching for micro builds
  • Works with Micro/Micro V2/Nano V2/SuperG TX modules
  • Compact and lightweight

Specifications

 

SuperX Mono RX

SuperX Nano RX

MCU

ESP32-C3

Telemetry Power

20dBm

Input Voltage

5V

Protocols

CRSF, SBUS, SUMD, DJI RS2 Pro, MAVLink

RF Chip

Single LR1121

Dual LR1121

Reception Mode

Single

Diversity/Gemini

Frequency Band

900M/2.4G

900M+2.4G

Antenna Connector

IPEX MHF1 x1

IPEX MHF1 x2

Weight

0.82g

1.45g

Dimensions

12.3 x 18.6mm

16.3 x 21.4mm

LUA Name

BFPV SuperX Mon

BFPV SuperX Nan

Recommended

2''- 5'' drones (racing, freestyle, long-range)

5'' + drones (freestyle, photography, long-range)

Diagram

SuperX Nano Receiver:

SuperX Mono Receiver:

Gemini

ExpressLRS Gemini revolutionises RC control by leveraging true diversity hardware to simultaneously transmit across 2.4GHz and/or 900MHz frequencies. Unlike conventional systems, Gemini utilises dual independent transmit/receive chains - delivering superior link quality (LQ) that thrives in challenging environments like race courses or urban areas.

Gemini offers three modes: 900M Gemini, 2.4G Gemini, and 900M+2.4G Gemini Xrossband (GemX). With GemX, you no longer need to choose between performance traits—it combines 2.4GHz's low latency and 900MHz's long-range in a single, seamless link.

Note: The GemX mode requires a dual-band TX.

SuperX Nano: 900M+2.4G Dual Band

Powered by dual LR1121 chips from Semtech, the SuperX Nano Receiver delivers uncompromising signal reliability with three modes: 900M Gemini (long-range penetration), 2.4G Gemini (ultra-low latency), and 900M+2.4G GemX (simultaneous operation). The included dual-band T antennas eliminate frequency-switching hassles, while advanced diversity processing ensures rock-solid stability in RF-challenged environments. Built for mission-critical applications, it's the ultimate solution for competitive racers, long-range explorers, and professional aerial photographers who demand zero-compromise performance.

SuperX Mono: Band-switching Agility

The compact and lightweight SuperX Mono Receiver harnesses a single LR1121 chip with a dual-band antenna, enabling seamless switching between 900M and 2.4G. This cost-effective solution maintains impressive 1000Hz packet rates (in FSK mode) while offering exceptional value, making it ideal for micro builds and budget-conscious pilots who need versatile performance in both close-range freestyle and long-distance applications.

TX Compatibility

SuperX vs. SuperD vs. Nano

 

SuperX RX

            SuperD RX             Nano RX

MCU

ESP32-C3

ESP32-PICO-D4

ESP8285

RF Chip

Dual LR1121, LR1121

Dual SX128X (2.4G), Dual SX1276 (900M)

SX128X (2.4G), SX1276 (900M)

Antenna Mode

Gemini, single

True diversity

Single

Frequency

900M+2.4G, 900M/2.4G

2.4G/900M

Telemetry Power

20dBm

20dBm (2.4G) / 17dBm (900M)

Modulation

LoRa, FSK

LoRa, FLRC

Serial Output Protocol

CRSF, SBUS, SUMD, DJI RS2 Pro, MAVLink

BETAFPV ExpressLRS Receivers

Choosing the right receiver is critical for optimal FPV performance. BETAFPV’s ExpressLRS lineup offers tailored solutions for every pilot: ELRS Lite, Micro, Nano, SuperP, SuperD, and the newest SuperX. From whoop racing to long-range cinematography, we engineer the low-latency links and interference-proof performance you demand.

Configuration

The SuperX Receiver currently supports CRSF/SBUS/SUMD protocols. The following takes CRSF protocol as an example to introduce its connection and pin configuration with Betaflight firmware flight controller.

Wiring diagram:

JST SH connector pin configuration:

Note: Betaflight and ExpressLRS use different JST SH connector pin configurations. Betaflight: 5V (V+), GND, RX, TX; ExpressLRS: GND, 5V (V+), TX, RX. When using the terminal wires for connection, please check the sequence.

Connect the flight controller to the Betaflight Configurator for basic configuration. First, on the "Port" tab, enable the flight controller serial port like UART1 as Serial Rx.

On the "Configuration" tab, set Receiver Mode to Serial (via UART) and Serial Receiver Provider to CRSF.

Bind

The SuperX Receiver uses ExpressLRS V3.x official protocol as its default firmware without a pre-set binding phrase. For successful operation, ensure the transmitter module also uses ExpressLRS V3.x or later firmware with no pre-set binding phrase.

  1. Power-cycle the receiver 3 times with a 1-second interval or press and hold the BOOT button for 2 seconds to enter binding mode.
  2. The RGB indicator flashes orange twice, which indicates the receiver is in bind mode.
  3. Configure remote control or transmitter module to bind with the receiver. If the RGB indicator is a solid light, it's bound!

Notes:

  • After binding once, the receiver will remember the autosaved binding phrase and device. Further restarting of the device will be bound automatically without the need for a rebinding process.
  • If you have flashed firmware to the SuperX and configured the binding phrase, you will not be able to bind using the method above. Please set the same binding phrase for the transmitter module, this allows the receiver to be bound to the device automatically.
  • It is recommended to place the two antennas as far apart as possible for better reception.

Includes

Item: SuperX ELRS Gemini Xross Receiver - Nano

  • 1x SuperX Nano Receiver
  • 2x Dual-band T Antenna
  • 1x SH1.0 Connector (Double Ended)
  • 2x Heat Shrink Tubing
  • 1x User Manual

Item: SuperX ELRS Gemini Xross Receiver - Mono

  • 1x SuperX Mono Receiver
  • 1x Dual-band T Antenna
  • 1x SH1.0 Connector (Single Ended)
  • 2x Heat Shrink Tubing
  • 1x User Manual

Browse more

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 32893038676

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 587 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Michael G.
Alexandria, US
★★★★★ 5
Works well!
Color: Grey
Works great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
N
Verified Purchase
Never leave your house
Carnegie, US
★★★★★ 5
good product
Size: 6FT*6FT, Color: Bright Yellow, Size: 6FT*6FT, Color: Bright Yellow
work beans sturdy and versitle easy install people said it bad because they are dorf hellen Kellers
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
A
Verified Purchase
Amazon Customer
New York, US
★★★★★ 1
Not worth it!
Size: 6FT*6FT, Color: Black
These are the terrible. They keep falling down. The bottom part doesn't stay tight so it keeps turning making it in possible to stay standing. Its the absolute worst!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026
T
Verified Purchase
Teri Beth
Dallas, US
★★★★★ 5
Good quality
Size: 6FT*6FT, Color: Black
Great privacy for our baby to sleep
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
E
Verified Purchase
Erlinda Calma
Natrona Heights, US
★★★★★ 5
Devider for his room
Size: 6FT*6FT, Color: Bright Yellow
Its a gift for my son he loved it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026

recommand products