Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SG116 PRO 1/16 40Km/h 4WD RC Racing Off-Road Drift CarYour browser does not support the video tag. Unleash high speed thrills with the SG116 PRO 1 16 4WD RC Drift Buggya compact but powerful off road performer that delivers real racing excitement. Featuring a 390 carbon brush magneto motor, rugged 4WD drivetrain, and top speeds of up to 40 km h, this RC car is built for adrenaline fueled performance on rough terrain, pavement, or track. Whether you're drifting through corners or launching into high speed
Unleash high-speed thrills with the SG116 PRO 1/16 4WD RC Drift Buggy—a compact but powerful off-road performer that delivers real racing excitement. Featuring a 390 carbon brush magneto motor, rugged 4WD drivetrain, and top speeds of up to 40 km/h, this RC car is built for adrenaline-fueled performance on rough terrain, pavement, or track.
Whether you're drifting through corners or launching into high-speed straightaways, the SG116 PRO offers the responsiveness, durability, and control serious RC enthusiasts demand.
Performance Features:
- Full-scale throttle and steering for precise, real-car control
- Double wishbone independent suspension and spring-loaded shocks
- Durable high-toughness PVC body shell
- Simulation big-foot tires for strong grip and stability
-
Rear-mounted lifting wheels prevent the car from flipping backward during hard acceleration
Built-in Safety Protections:
- Balanced charging protection: Prevents overcharging or overcurrent
- Motor anti-jamming shutoff for overload safety
- High-temperature ESC protection
- Low-voltage cut-off to protect battery health
Specifications:
- Brand: SG Racing
- Model: SG116 Pro
- Scale: 1:16
- Dimensions: 30 x 23 x 11.5 cm
- Motor: 390 Carbon Brush Magneto
- ESC: 30A 2S Splash proof
- Servo: 17G Five-Wire Digital
- Battery: 7.4V 1300mAh Li-ion (T-plug, 10C)
- Max Speed: Up to 40 km/h
- Run Time: Approx. 20 minutes
- Charging Time: 3 – 3.5 hours
- Remote Range: Up to 150 meters
- Frequency: 2.4GHz (requires 3x AA batteries, not included)
- Lights: LED Headlamps
- Recommended Age: 14+ Years
Check out 80Km/h SG116 MAX Version Here.
⚠️ Note to Users:
This is a high-performance, hobby-grade RC vehicle — not a toy. For safety and optimal performance:
- Operate only in open areas and avoid collisions with obstacles.
- Always use responsibly and follow the instructions provided in the user manual.
- As this is a high-speed RC car, check and tighten the wheel nuts between every battery charge to ensure safe operation.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 2434 reviews
Sort
Product Reviews
★★★★★ 4
Pretty good product
Style: Single Arm, Size: 13"-34"
Assembly of the actual stand is easy, mounting to a monitor is not because of industrial design fluff. Gotta make the side you DON'T see look "sleek" and "smooth" and "organic" and "integrated" because...reasons. While this is on the manufacturer(s) of the monitor itself, what semi-modern monitor uses 100x100 VESA anyway?
The included long screws are too long. Even using the plastic spacers they'll bottom out with a 2mm gap; add washers and it's a lever arm and not solid or confidence-inspiring. I used a die grinder to remove the excess material closer to 75x75 and used the included short screws, perfect. So either include 25mm screws instead of the 30mm (but then the spacers would be too long), or just update the mount plate to 75x75 only, and throw 100x100 "compatibility" into the dustbin of history where absolutely no one will miss it.
Arm does move/adjust smoothly and is holding a 34" widescreen where I left it 2 days ago, so it IS a great product once it's properly fitted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026
★★★★★ 5
Great monitor arm stand.
Style: Single Arm, Size: 13"-34"
Very happy with this product. It's sturdy and easy to install. Love the tilt and swivel feature. The fittings for the stand are very well made. I suggest this for the quality and the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 5
Easy to set up & works great
Style: Single Arm, Size: 13"-34"
It was super easy to get set up, came with all the hardware ypu need to install multiple ways. Holds my monitor securely and is still easy to move around. The adjustments are easy to access and have plenty of variation. Great purchase, such a reasonable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console.
The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse.
I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down.
Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions.
The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall.
The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw.
The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable.
Top arms go on smoothly, cable routing is simple and easy. No complaints about this section.
Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way.
At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024