Ti-FXDS Strap 20mm - Gray Reg
SKU: 79056420945

Ti-FXDS Strap 20mm - Gray Reg

Sale price$38.70 Regular price$43.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Ti-FXDS Strap 20mm - Gray RegThe 20mm width, Gray, Regular length Ti FXDS is a single pass watch strap built around a Grade 5 6AL 4V titanium buckle, heavy duty elastic rigger's webbing, and a high cycle hook and loop closure. Conceived as a field ready evolution of the classic military nylon watch strap, it was originally developed for fixed bar watches like the Tudor FXD and remains the only hook and loop strap of its type to pair titanium hardware with stretch nylon

The 20mm width, Gray, Regular length Ti-FXDS is a single-pass watch strap built around a Grade 5 6AL-4V titanium buckle, heavy-duty elastic rigger's webbing, and a high-cycle hook and loop closure. Conceived as a field-ready evolution of the classic military nylon watch strap, it was originally developed for fixed-bar watches like the Tudor FXD and remains the only hook and loop strap of its type to pair titanium hardware with stretch nylon construction.

The single-pass architecture keeps the underside of the watch case clean and unobstructed. Unlike double-layer NATO configurations, the Ti-FXDS threads through the watch's fixed or spring bar lugs in one continuous piece, then secures via hook and loop closure with a sewn nylon keeper loop for additional tail retention. The keeper slides over the webbing and can be removed if not needed.

Webbing is woven nylon with spandex, providing longitudinal stretch for wrist-conforming fit across the full adjustment range. The Grade 5 (Ti-6Al-4V) titanium buckle is fully non-magnetic and corrosion-proof. PDW specifies non-magnetic titanium hardware across its entire watch strap line as a compatibility requirement for wrist-mounted compasses. Non-ferromagnetic hardware eliminates the risk of compass needle deviation caused by adjacent metallic fields. The same property makes it suitable for dive watch applications where saltwater corrosion resistance is a requirement.

The hook and loop closure is rated for high-cycle use: over 13 years at twice-daily cycling, over 9 years at three cycles per day.

COLORWAY

Gray — Battleship gray woven nylon with spandex. Neutral against both stainless and titanium case finishes.

COMPATIBILITY

Designed for tool watches and dive watches. Fits fixed-bar and spring bar lug configurations. Not compatible with integrated bracelet lug systems. 20mm strap width fits watches with 20mm lugs. Representative compatible references: 40mm Rolex Submariners, 40mm Tudor Submariners, Seiko Prospex 1965 and Mini-Turtles, Sinn U50, U15, T50 and many field watches across the spectrum. If your watch takes a standard 20mm, the Ti-FXDS in 20mm will fit.

Materials:
  • Grade 5 6AL4V Titanium
  • Woven Nylon with Spandex
Dimensions:
  • Strap Width: 20mm
  • OAL: 285mm
  • Strap Thickness: 1.6mm
Approx. Weight:
  • 0.630oz
Features:
  • Fits Watches with 20mm Lugs
  • Buckle 100% Non-Magnetic
  • Buckle 100% Corrosion-Proof
  • Fine Matte Finish on Titanium Buckle
  • Durable, and Pliable Woven Nylon with Spandex for Stretch
  • Removable Strap Keeper with Woven SPD Kraken Trident Logo
  • High Cycle Hook and Loop
    • 13+ Years if Cycled Twice a Day
    • 9+ Years if Cycled Three Times a Day
  • Fits 7" - 8" Wrists
Marks:
  • SPD Trident Mark on Buckle
  • SPD Kraken Trident Logo on Strap Keeper

Ti-FXDS - Frequently Asked Questions

What watches is the Ti-FXDS compatible with?
The The Ti-FXDS 20mm fits any watch with 20mm lug width. It was designed around fixed-bar watches like the Tudor FXD but works with spring bar lug configurations as well. It is well suited to tool watches, dive watches, and field watches across both lug widths. It is not compatible with integrated bracelet lug systems.

What is the difference between Short and Regular length?
Regular is 285mm OAL and fits wrists approximately 7 to 8 inches. Short is 255mm OAL and is suited to smaller wrists from 6 to 7 inches. Both lengths use identical construction, hardware, and materials.

Is the Ti-FXDS a NATO-style watch strap?
No. NATO straps use a double-pass, two-layer construction that adds bulk under the case. The Ti-FXDS is a single-pass design: one layer of webbing threads through the lugs and secures with a hook and loop closure. This keeps the case sitting lower on the wrist and the underside of the watch unobstructed.

Why does PDW use titanium hardware on watch straps?
Grade 5 titanium is non-magnetic and corrosion-proof. PDW's watch strap line is designed for compatibility with wrist-mounted compasses, and non-magnetic hardware eliminates the risk of compass needle deviation from adjacent metallic fields. Titanium also resists corrosion in saltwater and humid environments, making it appropriate for dive watch use.

How long does the hook and loop closure last?
The closure is rated for high-cycle use. At twice-daily cycling it is designed to remain functional for over 13 years. At three cycles per day, over 9 years.

What is the orange tracer line on the OD Green variant?
The orange tracer is a single longitudinal thread woven into the OD Green webbing. It originates from military webbing practice where a contrasting thread allows rapid visual inspection of strap/webbing integrity. If the orange line is broken or pulled, the webbing has been compromised. It is originally a functional field inspection indicator, not a decorative element.

Is the strap keeper included?
Yes. A sewn nylon keeper loop is included with every Ti-FXDS strap. It slides over the webbing to secure the tail end after fastening. It can be removed if not needed.

Does the Ti-FXDS work with both fixed bar and spring bar watches?
Yes. The Ti-FXDS is compatible with both fixed bar and spring bar lug configurations. It was originally designed for fixed-bar watches like the Tudor FXD, but the single-pass construction works with standard spring bar lug setups as well.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 79056420945

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 2267 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
CML
Phoenix, US
★★★★★ 5
Great Phone Mount
This is a great little phone mount! Simple and effective. I’ve been wanting something for when I am pulled over at a super charger to be on a call or watching something on my phone without holding it or putting it in the cup holder. Works super well with my MagSafe case although it does come with extra magnets as well in case you don’t have a MagSafe case. Highly recommend! Easily attaches to the screen, no sticky residue or risk of sun staining on the dash like other mounts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 2, 2025
L
Verified Purchase
Lily
Massapequa, US
★★★★★ 5
Best one so far!
This is a great device! Not my first one but definitely better than I had before! It mounts on the side of the screen, which is very convenient as my other one was sticky, so I had to leave it with my other car. The handles rotate well to give you any position that suits you. There is some good suction, so it sticks well and doesn’t fall. It’s good quality and sturdy. The phone magnets very well to it and also doesn’t fall. I rotate it any way I want but mostly vertically and diagonally. I had it for a while now so can give you my honest opinion. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2025
T
Verified Purchase
Thomas Dinoto
Port Orchard, US
★★★★★ 5
Smash or Pass? ….Smash.
The smash phone mount did the trick. There was never a good or convenient place to put my phone in the 4-runner. This piece of kit fixed the issue nicely. Fits in the little storage spot tightly with a spring loaded friction mount. The hardware to manipulate the holder so you can customize your preference is made of metal so it will be durable and stable and bc you can change it around to fit your needs it has a lot of functionality. A little pricey but a good add-on for the rig.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
C
Verified Purchase
Celica49
Whiting, US
★★★★★ 5
Get the stubby, not the standard
This is a very nice mount. I strongly recommend the stubby version over the standard, mostly because you can move the phone holder around to help keep it visible and out of the way. As a taller guy, the standard mount would be hitting my knee when I get in the vehicle, but the stubby mount allows me to move it further towards the passenger side, which also keeps my cup holder usable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
J
Verified Purchase
John petre
West Palm Beach, US
★★★★★ 5
Smash mouth stubby
Phone mount works great. Very nice,easy to position were you want it. Fits tight in a useless cubby .Nice mount good quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026

recommand products